Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
A water based floor polish with a very high solids content. SLIP RESISTANT.Leaves a wet look high shine. Excellent wear rate. Apply with a clean damp mop or floor polish applicator. Machine buffable for longer lasting deep shine Download the Safety Data Sheet)
Download the Product Information Sheet for more information and detailed instructions.) Directions Polish must be applied to a clean grease free floor. Strip old polish with Merlin Floor Polish Remover then rinse thoroughly with clean water allow the floor to dry. Apply neat floor polish using a damp clean mop or better still a water applicator (040.230 & 040.232) that has been run under a tap and wrung out. Pour the floor polish into a tray, dip applicator or clean mop into polish tray and apply two coats. One in one direction N&S and the other E&W to obtain excellent floor coverage. Leave for 30 minutes to set to a hard dry shine. To clean & maintain always use a damp mop - well wrung out & not dripping with water. Use Merlin Polished Foor Maintainer 012.205 correctly diluted to help maintain the best look from your polished floor. Floor polish loves to be buffed with a floor polisher and a red floorpad. It makes the polish brighter & harder which in turn makes it last longer before applying another coat of polish. apply a thin even film of polish using a clean lint free mop or applicator apply a second coat when first is dry
Not suitable for . Unsealed wood , unsealed cork, or laminate flooring