FLUOROSEAL CF CARPET PROTECTOR - 5ltr no zoom available for this image
Rollover images to enlarge

FLUOROSEAL CF CARPET PROTECTOR - 5ltr

Product Code: 050.402
Price: £36.50
Fluoroseal CF is a dual function carpet & upholstery protector based on cationic fluoropolymer technology for durable soil and stain resistance

Product Features:

  •  

    Dual function carpet and upholstery protector based on cationic technology for durable soil and stai

  •  

    Suitable for use on most wet-cleanable carpets and fabrics

  •  

    WoolSafe approved protector for wool carpets and rugs

  •  

    White liquid.

Fluoroseal CF is a dual function carpet & upholstery protector based on cationic fluoropolymer technology for durable soil and stain resistance. Fluoroseal CF is suitable for use on most carpets and fabrics, subject to pre-testing and assessment. WOOLSAFE Approved protector for wool carpets and rugs.

For more information please check the link here :-Fluoroseal CF Product Specification Sheet

For SDS information please check the link here :-   Fluoroseal CF Safety Data Sheet 

For professional and industrial use only.
Always refer to Safety Data Sheet before use.
Fluoroseal CF is ready-to-use. Do not dilute with water.
Do not use on water sensitive fibres and fabrics. Before proceeding with
application, always pre-test an inconspicuous area of the carpet or fabric and
allow to dry completely. Check acceptance of water repellency and any change in
colour, shade or texture before proceeding with application.
Preparation: Thoroughly vacuum carpet or fabric, then extraction clean and rinse with B109 Fibre & Fabric Rinse.
Always prohibit people and pets during spray application and until carpet or fabric is completely dry.
Do not apply by trigger spray. Important: Do not aerosolise or produce fine spray mists or respirable particles.
Carpet application: Apply by Prochem pressure sprayer fitted with 8004 fan spray at the rate of 30 to 50 m² per 5 litres,
depending on carpet density. Spray with a light even stroke at low to medium pressure, then repeat in a crossing pattern
until correct amount of solution has been applied. Brush product into carpet with a Prochem pile brush, replace furniture on
protector pads and allow carpet to dry before re-use.
Upholstery application: Apply evenly by Prochem fabric protector spray applicator with 8002 fan spray. Coverage should
be approx. 1 litre per 15m² of fabric. Lightly brush protector into fabric with natural fibre upholstery brush and leave fabric to
dry completely before use.
Do not allow product to freeze. Flush equipment with water after use.
Wipe overspray immediately from wood, glass, metal and other surfaces
Fill in your details and we will contact you soon.
Captcha
Required Fields