Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
A special blend of phosphoric acid, detergents and solvent designed for cleaning
and restoring stone floor surfaces. Stoneclean is suitable for use on quarry tiles,
ceramic tiles and other acid resistant stone and tile interior flooring, subject to pretesting.
Stoneclean will effectively remove limescale, grout stains, general soil and Grease
For professional and industrial use only. Light duty cleaning: Mix 20ml Stoneclean per litre of water (1 to 50). General cleaning: Mix 100ml Stoneclean per litre of water (1 to 10). Restoration and limescale removal: Mix 250ml Stoneclean per litre of water (1 to 4).
Apply diluted solution by mop, soft brush or scrubbing machine. DO NOT SPRAY. Gently scrub surface if required, then allow short dwell period for cleaning action. Rinse well with plenty of clean water, then dry thoroughly with wet pick-up vacuum.
Floors can be buffed with a bonnet mop pad or a White or Red floor polishing pad when dry.
Always pretest surface in an inconspicuous area with diluted Stoneclean
solution before proceeding. Do not use Stoneclean on polished marble,
terrazzo, granite, travertine, limestone or other acid sensitive natural stone
composites, unless pre-testing indicates that the surface can be cleaned
without damage or discoloration. Avoid contact with aluminium, stainless steel and other metals which may be affected by contact with acids.
DANGER. Causes severe skin burns and eye damage. May be corrosive to metals.
